Catalogs >
MICROSTEP-MIS >
Active Road Sensor ARS31

Active Road Sensor ARS31
1Pages

Catalog excerpts

The active Runway-Sensor ARS31 is flush mounted in the pavement and determines the freezing temperature by active cooling and heating of sensor surface. The measured value of freezing temperature is independent from road salt concentration. The sensor casing consisting of two parts allows to change/replace the combined Sensors/Electronics unit for maintenance in every moment in few minutes. The sensor can be integrated into new and existing UMB-networks using converter. Combination of passive probe IRS31 and active probe ARS31 is possible and recommended. The probes are addressable and can be networked. Technical Data Dimensions Storage temperature - 30 °C to 70 °C Rated current • RS485 • baud rate: 2 400 to 38 400 bit/s (default: 19 200) • cable length: 25 m standard, up to 50 m possible Protection type CAGE CLAMP, WAGO ( < 0.5 mm) Operating temp. Operating relative humidity • Replaceable sensor/electronics • Mixture-independent measurement Power supply Freezing temperature Range • ± 1 °C for T > - 10 °C • else 10 % of measured value MicroStep-MIS, www.microstep-mis.com © 2013, All specifications subject to change without prior notice. Active Road Sensor

Open the catalog to page 1

Active Road Sensor ARS31 1Pages

Catalog excerpts

All MICROSTEP-MIS catalogs and technical brochures

Active Road Sensor ARS31
1Pages