• Products
  • Catalogues
  • News & Trends
  • Exhibitions

MB4 Custom chassis snow Blower - 4 Pages

Add to MyAeroExpo favorites
MB4 Custom chassis snow Blower
  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

Catalogue excerpts

MB4 Custom Chassis Snow Bloweri/l-B Companies,, Ine. The MB4 Chassis is designed for airport snow blowers and can interchange to host plows, front brooms, tow brooms, underbody scrapers, and other equipment as desired. Both engine enclosures on the MB4 feature full length, full height butterfly side covers that rotate upward, exposing the entire engine compartment for unimpeded maintenance access. The unique M-B blower ribbon features hydrostatic drive from the chassis engine. M-B electronic control assures ribbon speed exceeds ground speed. The blower engine's full 700 horsepower mechanically drives the impeller, enabling 7500 TPH performance and casting distances over 150 feet. The MB "Torque Flow" transfer case center differential constantly proportions torque between front and rear axles. Coupled with electronic automatic traction control the torque proportioning transfer case reduces tire wear while assuring the most efficient use of vehicle power. A tapered spring suspension allows for a smoother ride and increased driver control. Driver comfort is assured with air-ride seats and an air-ride cab. Quality You Can See. People You Can Trust.

 Open the catalogue to page 1

The MB4 operator is protected from fatigue by air ride seats and an air ride cab and interior noise levels well below OSHA requirements. The MB "Torque Flow" transfer case center differential constantly proportions torque between front and rear axles, directing power to the wheels with the most traction. Coupled with automatic traction control, torque proportioning reduces tire wear while assuring the most effective use of vehicle power. MB4 - Dual EnginesMB4 - 2 Person Cab The MB4 comes standard with a Caterpillar C13 475 HP electronic controlled turbocharged diesel drive engine coupled to an...

 Open the catalogue to page 2

MB4 Blower & Ribbon MB4 blower volume is maximized by M-B's unique application of torque and horsepower. The full power of a Caterpillar C18 700 HP engine is dedicated to mechanically driving the impeller by means of an over center clutch, drop box, and gear reduction. The result is up to 7500 tons of snow per hour, and cast distances exceeding 150 feet. The dual motor fully reversible ribbon is hydrostatically driven by an electronic control variable displacement hydrostatic pump mounted on the chassis engine. M-B electronic controls are programmed to assure that ribbon speed exceeds ground speed....

 Open the catalogue to page 3

SPECIFICATIONS: Axles Steering • MB 29,000 lb front drive/steer axle with operator controlled limited slip differential • Dana 23,000 lb rear driving axle with operator controlled limited slip differential • Optional MB 27,000 pound rear drive/steer axle with operator controlled limited slip differential • 35 degree cramp angle on all drive/steer axles • Integral gear two wheel front steer standard • Optional electronic four wheel steer allows 2-wheel front steer, 4-wheel coordinated, 4-wheel crab, and independent joystick control of rear axle. Joystick rear steer is independent from front axle...

 Open the catalogue to page 4

All M-B Companies, Inc. catalogues and technical brochures