4600 Pivot Lift Broom Package
1Pages

{{requestButtons}}

Catalog excerpts

4600 Pivot Lift Broom Package - 1

Shown with J-Hook hitch and gang hydraulic couplers Broom portion only. Does not include chassis • Integrally mounted on multiple chassis configurations of adequate size, axle and horsepower ratings. • Retrofittable to existing chassis • DIN type hitch for positive broom-to-chassis connection. J-hook hitch also available. • Front Mount Dedicated (FMD) broom only or Dual Purpose (DP) broom and plow configurations available • Optional types of quick disconnect hydraulic hose connections for DP configuration • 46” diameter @ 16, 18, 20, and 22 foot broom length; up to 18.0 foot swept path • Caterpillar C13, 475 HP, electronic turbocharged industrial diesel engine, 12.5 liter • 500 rpm broom with 4828 ft-lbs of available torque at the broom shaft at 5075 psi maximum working pressure • Optional: Caterpillar C11,385 HP, electronic turbocharged industrial diesel engine 477 rpm broom with 2656 ft-lbs of available torque at the broom shaft at 5075 psi • Optional: Caterpillar C9, 300 HP, electronic turbocharged industrial diesel engine 501 rpm broom with 2656 ft-lbs of available torque at the broom shaft at 5075 psi • Dual impeller forced air blower: 23,040 CFM @ 410 MPH • Use host chassis fuel supply • Operator friendly, cab portable operator’s control box, microprocessor CAN bus controls with MDC (Monitor, Diagnose, Control) color screen display. Optional integrated controls using CAN joystick. • 4 single tire caster assemblies for increased broom head stability • Single pivot swing for broom angle of either 35 degrees or 45 degrees • Dual end hydrostatic broom drive using infinitely variable speed pumps and fixed displacement motors • Free floating, shock absorbing, active weight transfer broom head hitch for superior broom pattern control, improved tractive effort, braking, steerability and overall handling of the broom chassis • Broom oscillation of 8 degrees (+4, -4) permitting broom head tilt independent of truck to compensate for surface variations to minimize brush pattern variation during operation • Power transmitted to the broom core via gearboxes utilizing keyed tapered hubs to prevent any looseness in the connection for vibration concerns. Molded urethane drive cogs for torque transmission. Hardened steel pilot plates and core sprockets to support the radial loads • Oil bath core center bearings • Optional automatic pattern adjustment and brush RPM ground speed control among others ISO 9001:2008 Certified Verisys Rogistra rs M-B Companies, Inc. / Airport Maintenance Products 1200 Park Street/ Chiton, Wisconsin 53014 1 >800*558*5800 / Fax; 920*849*2629 / sales@m*bco.com t wwW.rn*bcacom In the interest of continuous product improvement. M-B Reserves the right to change specificati

Open the catalog to page 1

All M-B Companies catalogs and technical brochures