50mm (2") and 63mm (2.5") Hose Bead
2Pages

Hose Beads Part No DB4042 /DBA11502 Technical Data The Fluid Transfer Hose Bead is available in three standard sizes and two others on request. All sizes consist of a nylon spherical body in two halves with internal body diameters to suit the outside diameter of the carrying hose. The two halves are clamped together with brass screws and nuts to avoid sparking and build up of static charge. An internal rib or retaining ring grips the hose, preventing the bead from slipping, as the two halves are clamped together. The recommended position of the first Bead should be approximately 1.5m from the Hose End Nozzle and spacing thereafter at 1.2m along the Hose. B Secured with M5 Brass Set Screw - 2off To Suit Hose Diameter Dimensions The Fluid Transfer Hose Bead is available in five sizes. Standard sizes are Ø 38mm (11/2") Ø 50mm (2") and Ø 63mm (21/2") details of the larger Ø 75mm (3") and Ø 100mm (4") sizes are available on request Colour Hose Diameter Inch (mm) Black Only Maintenance Hose beads require no maintenance only replacement when locally worn "flat" exceeds 40mm length. FTi’s policy of continuous improvement means we reserve the right to alter designs and specifications without notice. The descriptions, illustrations and product references in the datasheet are for information purposes only and are not binding. (Updated December 09)

Hose Beads Part No DB4042 /DBA11502 Applications Hard-wearing nylon sphere added to fuelling hoses to protect them from abrasion. SIzes Standard sizes to suit type C aviation hose: Ø 38mm (11/2") Ø 50mm (2") Ø 63mm (21/2") Features • Easy to assemble/replace • Nylon wear-resistant body • Brass fixings • Bright colours for visibility. Options Additional sizes available on request are: Ø 75mm (3") Ø 100mm (4") Specification The Fluid Transfer Hose Bead is designed to reduce fuelling hose wear caused by abrasion when the hose is dragged across the ground. Hose beads attached to the surface of...