IB-D12 Shallow Inset Light Base - 12" Ductile Iron
2Pages

{{requestButtons}}

Catalog excerpts

IB-D12 Shallow Inset Light Base - 12" Ductile Iron - 1

Airport Light Bases SIB-D12Shallow Inset Light Base12" Ductile Iron Applications The SIB (Shallow Inset Base) is a load-bearing base designed to mount a 12" diameter inset fixture (11.25 dia. BC) into a taxiway or runway pavement location. Features ■ Ductile Iron Material* - Crouse-Hinds recommends use with like-metals ■ Tapered sides to resist heaving from the pavement ■ Open bottom casting cavities which fill with the setting epoxy to eliminate torquing in the pavement ■ Outer retaining ring prevents epoxy flowing into the base. Easy light fixture removal. ■ Feed-thru entry version with watertight seals ■ Secondary plug(s) inside the base for ease of maintenance with feed-thru entry versions ■ Includes plywood cover used during installation process and re-usable mounting hardware * Recommended for use with Ductile iron fixtures Fixture Type: Entry Type: 1 = One Feed-thru Entry (2 Conductors), 90° (Side B) Standard Entry Location 2 = Two Feed-thru Entry (4 Conductors), 90° (Side B) Standard Entry Location F1 = Flexible Rubber Grommets for 1 Inch Conduit, 0° and 180° (Sides A and C) Standard Entry Locations H50 = Threaded Hole 1/2-14 NPT, 0° and 180° (Sides A and C) Standard Entry Locations H75 = Threaded Hole 3/4-14 NPT, 0° and 180° (Sides A and C) Standard Entry Locations H1 = Threaded Hole 1-111/2 NPT, 0° and 180° (Sides A and C) Standard Entry Locations B2 = Center Bottom Entry Via Flexible Rubber Grommet for 2 Inch Conduit Entry Locations: - No Symbol means Standard Locations as noted under "Entry Type" A = Side A: 0° B = Side B: 90° C = Side C: 180° D = Side D: 270° Options: - CR = Corrosion Resistant Coating GE = Ground Wire, External GI = Ground Wire, Internal

Open the catalog to page 1
IB-D12 Shallow Inset Light Base - 12" Ductile Iron - 2

PLYWOOD COVER 900012-B-12 12.0 (305 DIAMETER) BLACK OXIDE BOLT* 20033-2 GROUND WIRE #12 AWG (OPTION -GE) SECONDARY WIRESTO REMOTE ISOLATION TRANSFORMER * Typical for 6 bolts equally spaced on 11.25 (286) diameter bolt circle Note: The bolt holes on Sides B & D are aligned perpendicular to the runway to taxiway centerline. Dimensions: Inches Home Office: United States - +1 860-683-4300 International Offices: Canada • China • Dubai • Mexico • Brazil

Open the catalog to page 2

All EATON CROUSE-HINDS catalogs and technical brochures

  1. PRO III TCL

    2 Pages

  2. PRO APF MIRL

    2 Pages

  3. PRO III TOL

    2 Pages

  4. PRO III SBGL

    2 Pages

  5. PRO APF AGS

    16 Pages

  6. AGS-LED

    4 Pages

  7. REIL-LED

    1 Pages

  8. AV07

    2 Pages

  9. AV-LC

    1 Pages

Archived catalogs

  1. AV-LC

    1 Pages