• Products
  • Catalogues
  • News & Trends
  • Exhibitions

BNS 4910 - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

Main / Standby Switching Unit BNS 4910 ATC The BECKER BNS 4910 is a high performance switch designed to control two transmitters and two receivers in Main/ Standby configuration. The BNS 4910 can operate in MANUAL and AUTOMATIC modes, from the front panel or remotely, in case of failure at the Main unit. Design of the unit is micro controller-based. Design is micro controller-based (HC11) Series link access (RS485, 4 wires) with JBUS protocol, allowing monitoring and remote control of the unit Wire-to-wire compatible with the 4900 Series transmission and reception equipment Fits in standard 19’’ rack with a height of 1U All connectors are at the rear panel Local / Remote operation Manual / Automatic operation Contact us · Tel. +49 (0) 7229-305-0 · info@becker-avionics.de · www.becker-avionics.de Issue 08a/2012, ©2012 by Becker Flugfunkwerk GmbH, All Rights Rese

 Open the catalogue to page 1

Main / Standby Switching Unit BNS 4910 ATC RS 485 - 4 wires. JBUS. 1200, 2400, 9600, 19200 baud NRZ, 1 start bit, 8 data bits, 1 stop bit, no parity Configurable from 1 to 255. 24 VDC (21 - 31V), negative to ground Issue 10/2012, ©2012 by Becker Flugfunkwerk GmbH, All Rights Reserved

 Open the catalogue to page 2

All BECKER AVIONICS catalogues and technical brochures

  1. ATLASS Brochure

    2 Pages

    En
  2. LRC 4201

    2 Pages

    En
  3. GS5910

    2 Pages

    En
  4. GK61X

    2 Pages

    En
  5. AR6201 07 2014

    2 Pages

    En
  6. ATC4401 07 2014

    2 Pages

    En